|
General Description of Magnetic Bar:
SWMAG Magnetic Bars provide an effective means removing ferrous chips and metal particles from loosely packed, free flowing materials. They are usually constructed of 304 stainless steel tubes, or 316 stainless steel tubes for special domains filled with Ceramic or Rare Earth Magnet. Either round or square shape bars are available for customers¡¯ desiring for special applications.
Specification: Our standard bars is 25mm.(1 inch) in diameter and any length per customers¡¯ request up to 2500mm.. Besides, we also take special orders, such as square shape Magnetic bars. |
|
|
|
Maximum Operation Temperature: 6 serieses are available for customer to choose from
N series up to 80 degree
M series up to 100 degree
H series up to 120 degree
SH series up to 150 degree
UH series up to 180 degree
EH series up to 350 degree |
Threaded Hole:
- Tapped threaded holes at each end for easy installation.
- Tapped one threaded hole at one end, and the other end is plain welded.
- Both of ends are plain welded.
|
|
| |
|
Magnet Strength: Per customers¡¯ requirement. The highest is up to 12,000GS (1.2T).
Following is the relationship between diameter, magnetic strength and Maximum Operation Temperature for reference: |
| |
0.25T |
0.5T |
0.7T |
0.9T |
1T |
1.1T |
1.2T |
| Φ19 (0.75") |
√EH |
√EH |
√EH |
√H |
√M |
- |
- |
| Φ22 (0.85") |
√EH |
√EH |
√EH |
√H |
√M |
√N |
- |
| Φ25 (1.00") |
√EH |
√EH |
√EH |
√SH |
√H |
√M |
√N |
| Φ32 (1.25") |
√EH |
√EH |
√EH |
√SH |
√H |
√M |
√N |
| Φ38 (1.50") |
√EH |
√EH |
√EH |
√UH |
√SH |
√H |
√M |
| Φ50 (1.75") |
√EH |
√EH |
√EH |
√UH |
√SH |
√H |
√M |
| Φ76 (3.00") |
√EH |
√EH |
√EH |
√UH |
√UH |
√SH |
√H |
| Φ100(4.00") |
√EH |
√EH |
√EH |
√UH |
√UH |
√SH |
√H |
|
Remark:"√: means it can be manufactured on the condition of the diameters listed in the table."- "means can not manufacture. |
|
|
